RFID or Radio Frequency Identification is the use of any device that can be sensed or detected wirelessly through the useof radio frequency technology. RFID application has been used in many applications ranging from tagging of library books and assets,electronic toll collection system, healthcare, security accesssystem and many other applications. A typical RFID system consists of a transponder where a microchip with an antenna is embedded in an item. A reader with antenna is used to read data or write data to the transponder wirelessly. The data read is then passed to a computer where it is used for business transactions.
A study shows that the market for RFID application in the year 2001 was USD1 billion and expected to reach USD4.6 billion by the year 2007. In the past, the cost of RFID tags was an obstacle to its use in mass quantity. However, as the wireless technology becomes more readily available and cheaper due to its demand in the global market, its use is expected to rise at a rate not imagined before.
There are basically 2 types of RFID in use today. They are passive and active types with frequency ranging from 125kHz to2.45GHz.
Passive Type
The passive tags do not have any transmitter and obtained its power supply from the electromagnetic waves emittedby the reader. This type of tags are cheaper and could range from 15 cents to 50 cents and require minimal maintenance. Theyhave operational range of a few inches to 30 feet. The frequency used can range from 125kHz to 2.45GHz depending on the applications but usually lower frequencies components are cheaper. Passive tags are used in retail business and manufacturing processes.
Active Type
The active tags have transmitter and its own power source. The power source can be solar energy, batteries or from othersources. The transponder is able to communicate with the reader without getting the power supply from the reader. The range of communication is from 60 feet to 300 feet with higher frequencies used. Frequencies used are 455MHz to 5.8GHz.
The application of active type is in large inventory assets control and containers where they need to be tracked over a larger area or distance. Another application is in electronic toll collection system where the transponder will be active whenit received a signal from the reader. It then communicates with the reader and do the necessary transactions after whichit will go back to sleep or idle mode. In this way, the lifetime of the batteries used in the transponder is extended.
The RFID passive type where a frequency of 13.56MHz is used in itsdevelopment can be obtained from RFID Application - Passive 13.56MHz Application Note Microchip website.
A study shows that the market for RFID application in the year 2001 was USD1 billion and expected to reach USD4.6 billion by the year 2007. In the past, the cost of RFID tags was an obstacle to its use in mass quantity. However, as the wireless technology becomes more readily available and cheaper due to its demand in the global market, its use is expected to rise at a rate not imagined before.
There are basically 2 types of RFID in use today. They are passive and active types with frequency ranging from 125kHz to2.45GHz.
Passive Type
The passive tags do not have any transmitter and obtained its power supply from the electromagnetic waves emittedby the reader. This type of tags are cheaper and could range from 15 cents to 50 cents and require minimal maintenance. Theyhave operational range of a few inches to 30 feet. The frequency used can range from 125kHz to 2.45GHz depending on the applications but usually lower frequencies components are cheaper. Passive tags are used in retail business and manufacturing processes.
Active Type
The active tags have transmitter and its own power source. The power source can be solar energy, batteries or from othersources. The transponder is able to communicate with the reader without getting the power supply from the reader. The range of communication is from 60 feet to 300 feet with higher frequencies used. Frequencies used are 455MHz to 5.8GHz.
The application of active type is in large inventory assets control and containers where they need to be tracked over a larger area or distance. Another application is in electronic toll collection system where the transponder will be active whenit received a signal from the reader. It then communicates with the reader and do the necessary transactions after whichit will go back to sleep or idle mode. In this way, the lifetime of the batteries used in the transponder is extended.
The RFID passive type where a frequency of 13.56MHz is used in itsdevelopment can be obtained from RFID Application - Passive 13.56MHz Application Note Microchip website.
No comments:
Post a Comment